主要工藝環節應用

Main process application

前處理工藝

Pre treatment process

脫脂：汽車車身在沖壓和焊接過程中會沾染油污等，涂裝流水線的脫脂環節通常采用堿性脫脂劑，通過噴淋或浸泡的方式，去除車身表面的油脂和污垢，為后續處理提供清潔表面。

Degreasing: During the stamping and welding process, the car body may be contaminated with oil stains. The degreasing process of the painting assembly line usually uses alkaline degreasing agents to remove grease and dirt from the surface of the car body through spraying or soaking, providing a clean surface for subsequent treatment.

磷化：經脫脂后的車身進入磷化槽，通過化學反應在車身表面形成一層磷化膜，這層膜可以增強涂層與車身的附著力，提高耐腐蝕性，一般采用鋅系磷化工藝較多。

Phosphating: After degreasing, the car body enters the phosphating tank and forms a layer of phosphating film on the surface of the car body through chemical reaction. This film can enhance the adhesion between the coating and the car body, improve corrosion resistance, and generally use zinc based phosphating process.

鈍化：磷化后的鈍化處理可進一步提高磷化膜的耐腐蝕性和穩定性，通常使用含鉻或無鉻鈍化劑，在車身表面形成一層鈍化保護膜。

Passivation: Passivation treatment after phosphating can further improve the corrosion resistance and stability of the phosphating film. Usually, chromium containing or chromium free passivators are used to form a passivation protective film on the surface of the vehicle body.

噴漆工藝

Spray painting process

底漆噴涂：汽車車身進入噴漆室，首先進行底漆噴涂。底漆能夠為車身提供良好的防腐性能，并為面漆提供良好的附著基礎。一般采用電泳涂裝工藝，通過電場作用使涂料粒子均勻地沉積在車身表面，形成均勻的底漆涂層。

Primer spraying: When the car body enters the paint booth, the first step is to spray the primer. Primer can provide good anti-corrosion performance for the vehicle body and provide a good adhesion foundation for the topcoat. Generally, electrophoretic coating technology is used to uniformly deposit coating particles on the surface of the vehicle body through the action of an electric field, forming a uniform primer coating.

中涂噴涂：中涂漆主要起到填充和平整表面的作用，提高車身表面的平整度和光滑度，同時增強涂層的耐水性和耐石擊性。中涂漆通常采用自動噴涂設備，如機器人噴涂，以保證噴涂的均勻性和質量。

Mid coat spraying: Mid coat paint mainly plays a role in filling and leveling the surface, improving the flatness and smoothness of the vehicle surface, while enhancing the water resistance and stone impact resistance of the coating. Automatic spraying equipment, such as robot spraying, is usually used for mid coat painting to ensure uniformity and quality of spraying.

面漆噴涂：面漆是汽車外觀的直接體現，其顏色和光澤度直接影響汽車的美觀度和市場競爭力。面漆噴涂一般采用靜電噴涂技術，利用靜電吸附原理使涂料更均勻地附著在車身表面，同時可以提高涂料的利用率。根據汽車的不同需求，面漆可分為素色漆、金屬漆和珠光漆等。

Topcoat spraying: Topcoat is a direct reflection of the appearance of a car, and its color and glossiness directly affect the beauty and market competitiveness of the car. The topcoat spraying generally adopts electrostatic spraying technology, which uses the principle of electrostatic adsorption to make the coating more evenly adhere to the surface of the vehicle, and can also improve the utilization rate of the coating. According to the different needs of automobiles, topcoats can be divided into plain paint, metallic paint, and pearl paint.

干燥固化工藝

Drying and curing process

烘干：每一層涂料噴涂后都需要進行烘干處理，以去除涂料中的溶劑和水分，使涂料固化成膜。烘干過程通常在烘干室中進行，采用熱風循環或紅外線輻射等加熱方式，嚴格控制烘干溫度和時間，確保涂層的質量和性能。一般底漆烘干溫度在 160 - 180℃，中涂和面漆烘干溫度在 140 - 160℃。

Drying: After each layer of coating is sprayed, it needs to be dried to remove solvents and moisture from the coating, so that the coating can solidify into a film. The drying process is usually carried out in a drying room, using heating methods such as hot air circulation or infrared radiation to strictly control the drying temperature and time, ensuring the quality and performance of the coating. The general drying temperature for primer is 160-180 ℃, while the drying temperature for intermediate and topcoat is 140-160 ℃.

冷卻：烘干后的車身需要進行冷卻，使其溫度降至室溫，以便進行后續的操作。冷卻方式一般采用自然冷卻或強制風冷，確保車身溫度均勻下降，避免產生熱應力和變形。

Cooling: The dried vehicle body needs to be cooled to room temperature for subsequent operations. The cooling method generally adopts natural cooling or forced air cooling to ensure a uniform decrease in body temperature and avoid thermal stress and deformation.

應用優勢

Application advantages

提高生產效率：涂裝流水線實現了汽車涂裝的自動化和連續化生產，各個工藝環節緊密銜接，大大縮短了汽車涂裝的生產周期，提高了生產效率。例如，一條先進的汽車涂裝流水線每小時可完成數十輛汽車的涂裝作業。

Improving production efficiency: The painting assembly line has achieved automation and continuous production of automotive painting, with closely connected process links, greatly shortening the production cycle of automotive painting and improving production efficiency. For example, an advanced car painting assembly line can complete the painting operation of dozens of cars per hour.

保證涂裝質量：通過精確控制涂裝工藝參數和采用先進的涂裝設備，涂裝流水線能夠保證汽車涂層的均勻性、平整度和附著力等質量指標，提高汽車的外觀質量和耐腐蝕性。機器人噴涂和自動輸送系統可以減少人為因素對涂裝質量的影響，使每輛車的涂裝質量都能達到較高的標準。

Ensuring coating quality: By precisely controlling coating process parameters and using advanced coating equipment, the coating assembly line can ensure the uniformity, flatness, and adhesion of automotive coatings, improving the appearance quality and corrosion resistance of automobiles. The robot spraying and automatic conveying system can reduce the influence of human factors on the painting quality, so that the painting quality of each vehicle can reach a high standard.

降低生產成本：自動化的涂裝流水線減少了人工操作，降低了人工成本。同時，通過優化涂料供應系統和回收利用技術，提高了涂料的利用率，減少了涂料的浪費，降低了材料成本。此外，高效的生產和穩定的質量也有助于降低整體的生產成本。

Reduce production costs: Automated painting assembly lines reduce manual operations and lower labor costs. Meanwhile, by optimizing the coating supply system and recycling technology, the utilization rate of coatings has been improved, waste of coatings has been reduced, and material costs have been lowered. In addition, efficient production and stable quality also contribute to reducing overall production costs.

提升環保水平：現代涂裝流水線配備了先進的廢氣處理、廢水處理和廢渣處理系統，能夠有效減少涂裝過程中污染物的排放，降低對環境的影響。例如，采用活性炭吸附、催化燃燒等技術處理噴漆廢氣，使廢氣中的 VOCs 含量達到環保排放標準。

Improving environmental protection level: Modern painting assembly lines are equipped with advanced exhaust gas treatment, wastewater treatment, and waste residue treatment systems, which can effectively reduce the emission of pollutants during the painting process and reduce the impact on the environment. For example, technologies such as activated carbon adsorption and catalytic combustion are used to treat paint exhaust gas, so that the VOCs content in the exhaust gas meets environmental emission standards.

發展趨勢

Development Trends

智能化：隨著人工智能和物聯網技術的發展，涂裝流水線將更加智能化。通過安裝傳感器和監控設備，實現對涂裝過程的實時監控和數據分析，自動調整工藝參數，提高涂裝質量和生產效率。同時，智能機器人將在涂裝流水線中得到更廣泛的應用，實現更加復雜和精細的涂裝操作。

Intelligence: With the development of artificial intelligence and Internet of Things technology, painting assembly lines will become more intelligent. By installing sensors and monitoring equipment, real-time monitoring and data analysis of the painting process can be achieved, automatic adjustment of process parameters can be made, and painting quality and production efficiency can be improved. At the same time, intelligent robots will be widely used in painting assembly lines to achieve more complex and precise painting operations.

綠色化：環保要求的不斷提高將推動涂裝流水線向綠色化方向發展。一方面，將采用更加環保的涂料，如水性涂料、高固體分涂料和粉末涂料等，減少 VOCs 的排放；另一方面，將進一步優化廢氣、廢水和廢渣處理技術，實現污染物的零排放或超低排放。

Greening: The continuous improvement of environmental protection requirements will drive the development of coating assembly lines towards greening. On the one hand, more environmentally friendly coatings such as water-based coatings, high solid coatings, and powder coatings will be used to reduce VOC emissions; On the other hand, further optimization of waste gas, wastewater, and waste residue treatment technologies will be carried out to achieve zero or ultra-low emissions of pollutants.

集成化：未來的涂裝流水線將更加注重與汽車制造其他工藝環節的集成化，實現從車身焊接到涂裝再到總裝的無縫銜接，提高整個汽車制造過程的協同性和效率。同時，涂裝設備制造商也將提供更加集成化的解決方案，將涂裝設備、輸送設備、環保設備等進行一體化設計和制造，為汽車制造商提供更加便捷和高效的服務。

Integration: In the future, the painting assembly line will pay more attention to the integration with other process links in automobile manufacturing, achieving seamless connection from body welding to painting and final assembly, and improving the synergy and efficiency of the entire automobile manufacturing process. At the same time, coating equipment manufacturers will also provide more integrated solutions, integrating the design and manufacturing of coating equipment, conveying equipment, environmental protection equipment, etc., to provide more convenient and efficient services for automobile manufacturers.

上一篇：工業涂裝流水線是工業生產中的重要性
下一篇：如何選擇合適的焊煙除塵設備